Defender Accessories | Land Rover Defender

Adventure

In some of the remotest places in the world, survival can depend on being able to push a Defender to the absolute limit. These Land Rover approved accessories will help you do just that.

Accessories for this model of Defender: A-Frame Protection Bar - Non Winch Version* Part No: VPLPP0060
Manufactured from durable polymer, suitable for models with or without air conditioning.

Part Number:
A-Frame Protection Bar – Winch Version* - VPLPP0061

*Compliant to EEC Directive 2005/66.; Chequer Plate Protection Kit, for Defender 90 – Silver Part No: STC50245
Features sill edge and rear corner protectors and two front bumper step plates.

Part Numbers:
Defender 90SW, silver STC50245.
Defender 110SW – except HCPU – silver (not shown) - STC50381.
Defender 110SW – except HCPU - black (not shown) - EBN500051.
Defender 90SW, black (not shown) - EBN500050.

Please note: Front bumper step plates are not compatible with PIAA Driving Lamp Kit (LR006815).; Hinged Lamp Guards† – Front Pair* Part No: STC53161
These hinged lamp guards will help protect front and rear lenses from flying stones and low-speed impact, with an opening feature to enable easy lamp cleaning. Constructed from durable, black nylon-coated steel with plastic ‘P’ clips to help prevent corrosion.

Part Number:
Hinged Lamp Guards – front pair STC53161.

*Not compatible with Front Lighting Pack and Moulding Kit.
†Not available in all European markets. Please see your Land Rover Dealer for further details.; 9.5ti Electric Winch† Part No: VPLDP0113
Rated capacity of 9,500lb/4,310kg. 38m x 8mm diameter wire rope. This powerful electric winch is designed to fit easily to the front of your Defender, even if the air conditioning option is fitted. Offering maximum reliability for all general winching and self recovery requirements, the winch is available as a complete vehicle kit, ensuring specification and installation are straightforward.
Features include:

• Fully reversible power for two-way winching
• Remote control operation, with 3.7m/12 foot cable
• Fully automatic load actuated braking system
• Tough replacement bumper/winch mounting designed to cope with heavy duty usage
• Sealed-for-life, water resistant winch gear housing
• Kit includes winch, mounting brackets, remote control, electrics safety cut-out switch and fixings.

†Not recommended for use with Moulding Kit - ( LR008361).; Upgraded Performance Headlight Bulbs - Pair Part No: VPLDV0061
Enhanced light output.

2007 Model Year vehicles onwards.; Undershield Old Style Part No: STC50437
Aluminium blade with steel sub-structure.

A-Frame Protection Bar – Winch Version* Part No: VPLPP0061
Manufactured from durable polymer, suitable for models with or without air conditioning.

*Compliant to EEC Directive 2005/66.

Sports

Sometimes even Defender needs extra help with the awkward loads. Sports bars give Defender the flexibility to deal with heavy kit, while the Aqua sports carrier makes easy work of kayaks, surfboards and windsurfers.

Accessories for this model of Defender: Aqua Sports Carrier*‡ Part No: LR006846
Carries one surfboard or sailboard and mast, or one canoe or kayak. Maximum payload 45kg†.

*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories.
†Maximum permissible load capacity minus the weight of the roof mounted accessory.
‡Not available in all European markets. Please see your Land Rover Dealer for further details.; Sports Bar System*† Part No: STC7582
A high leg design which extends the carrying potential for a variety of equipment. The sports bars can accommodate a range of attachments, including roof boxes and special carriers for various sports equipment. Vehicle height when fitted 2,088mm (90SW) and 2,141mm (110SW). Maximum payload 75kg†.

*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories.
†Maximum permissible load capacity minus the weight of the roof mounted accessory.; Front Mudflaps Part No: RTC9479
Heavy duty moulded mudflaps reduce spray and help protect vehicle paintwork. Mudflaps, front pair for 90 and 110 models only.; Side Protection Runners (to fit 90 models) Part No: LR008379
The sturdy steel design of these Side Protection Runners enhances the appearance of your Defender as well as easing entry and exit. Available in black finish. The moulded rubber footgrips ensure non-slip stability.

Part Number:
Black Finish - Defender 110 SW and Double Cab (not shown) - LR008375.; Raised Air Intake Part No: LR008383
Ideal for dusty conditions, this raised air intake secures to the vehicle’s ‘A’ post and also utilises the existing air intake vent fixings. Suitable for Td5, 2.4 and current 2.2 Diesel engines.

Please note: Not compatible with SVX Soft Top model.; Front Lighting Pack LHD – with Headlamp Levelling Part No: VPLDV0003
Includes headlamp, main beam and indicator lamp.

Part Numbers:
Requires Moulding Kit LR008361.
RHD - with headlamp levelling - VPLDV0001
RHD - without headlamp levelling - VPLDV0002
LHD - without headlamp levelling - VPLDV0004; Moulding Kit - Bright Silver Finish Part No: LR008361
Includes four bar grille and headlamp moulding surrounds.

Please Note: Not recommended for use with 9.5ti Electric Winch - VPLDP0113

16 inch 5-Spoke Alloy Wheel – Dual Finish (Rim Only) Part No: VPLDW0001YCM

Features distinctive embossed Defender branding.
Recommended tyre: Continental Conticross Contact AT 235/85 R16. Defender 90 and 110 only with standard suspension.

Also shown: Centre Cap Bright Polished Finish - LR023301.

Compatible with 2009 Model Year vehicles onwards.

Please note: When choosing vehicles fitted with specific wheel and tyre combinations or optional wheels and tyres, your intended use of the vehicle should be considered. Alloy wheels may be more vulnerable to damage in some off-road conditions. Please discuss your requirements with your Land Rover Dealer when selecting your vehicle and specification.

Utility

Defender is right at home in tough working environments, but these accessories provide extra protection in potentially hazardous conditions.

Accessories for this model of Defender: A-Frame Protection Bar - Non Winch Version* Part No: VPLPP0060
Manufactured from durable polymer, suitable for models with or without air conditioning.

Part Number:
A-Frame Protection Bar – Winch Version* - VPLPP0061

*Compliant to EEC Directive 2005/66.; Chequer Plate Protection Kit, for Defender 90 – Silver Part No: STC50245
Features sill edge and rear corner protectors and two front bumper step plates.

Part Numbers:
Defender 90SW, silver STC50245.
Defender 110SW – except HCPU – silver (not shown) - STC50381.
Defender 110SW – except HCPU - black (not shown) - EBN500051.
Defender 90SW, black (not shown) - EBN500050.

Please note: Front bumper step plates are not compatible with PIAA Driving Lamp Kit (LR006815).; Hinged Lamp Guards† – Front Pair* Part No: STC53161
These hinged lamp guards will help protect front and rear lenses from flying stones and low-speed impact, with an opening feature to enable easy lamp cleaning. Constructed from durable, black nylon-coated steel with plastic ‘P’ clips to help prevent corrosion.

Part Number:
Hinged Lamp Guards – front pair STC53161.

*Not compatible with Front Lighting Pack and Moulding Kit.
†Not available in all European markets. Please see your Land Rover Dealer for further details.; Front Mudflaps Part No: RTC9479
Heavy duty moulded mudflaps reduce spray and help protect vehicle paintwork. Mudflaps, front pair for 90 and 110 models only.; Wing Top Protectors – Silver Part No: LR005230
Manufactured in an aluminium chequer plate design, these enable access to roof racks and a potential viewing height advantage.

Part Numbers:
Wing Top Protectors – Silver LR005230.
Wing Top Protectors - Black (not shown) LR005242

2007 Model Year vehicles onwards.; Sports Bar System*† Part No: STC7582
A high leg design which extends the carrying potential for a variety of equipment. The sports bars can accommodate a range of attachments, including roof boxes and special carriers for various sports equipment. Vehicle height when fitted 2,088mm (90SW) and 2,141mm (110SW). Maximum payload 75kg†.

*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories.
†Maximum permissible load capacity minus the weight of the roof mounted accessory.; Multi-Height Tow Bar** – for 90 vehicles Part No: LR006309
This cost - effective design gives a range of towing heights to suit different trailers and contains a towing armature, multi - height face plate and 50mm Tow Ball.

Part Numbers:
Defender 110 (except HCPU) (not shown) - LR006310.
Defender 130 HCPU (not shown) - LR006312.

**For information relating to load capabilities, please refer to the vehicle handbook.; 9.5ti Electric Winch† Part No: VPLDP0113
Rated capacity of 9,500lb/4,310kg. 38m x 8mm diameter wire rope. This powerful electric winch is designed to fit easily to the front of your Defender, even if the air conditioning option is fitted. Offering maximum reliability for all general winching and self recovery requirements, the winch is available as a complete vehicle kit, ensuring specification and installation are straightforward.
Features include:

• Fully reversible power for two-way winching
• Remote control operation, with 3.7m/12 foot cable
• Fully automatic load actuated braking system
• Tough replacement bumper/winch mounting designed to cope with heavy duty usage
• Sealed-for-life, water resistant winch gear housing
• Kit includes winch, mounting brackets, remote control, electrics safety cut-out switch and fixings.

†Not recommended for use with Moulding Kit - ( LR008361).

A-Frame Protection Bar – Winch Version* Part No: VPLPP0061
Manufactured from durable polymer, suitable for models with or without air conditioning.

*Compliant to EEC Directive 2005/66.

Jaguar Land Rover Limited: Registered Office: Abbey Road, Whitley, Coventry CV3 4LF Registered in England No: 1672070

Landrover

Defender lifestyle inspiration accessories

Defender

Adventure

Sports

Utility