Landrover

Landrover

DEFENDER LIFESTYLE INSPIRATIONS ACCESSORIES

Practicality comes as standard on Defender. Even so, accessories can add extra capability as well as the personal touch. There are several carrying and towing options, exterior styling and protection additions, interior enhancements and alloy wheel designs. They’re all available individually and can be fitted at any time – not just when the vehicle is new.

Adventure

In some of the remotest places in the world, survival can depend on being able to push a Defender to the absolute limit. These Land Rover approved accessories will help you do just that.

Accessories for this model of Defender
A-Frame Protection Bar* A-Frame Protection Bar* Part No:  VPLPP0060

Manufactured from durable polymer, suitable for models with or without air conditioning. *Compliant to EEC Directive 2005/66.

Chequer Plate Protection Kit, for Defender 90 – Silver Chequer Plate Protection Kit, for Defender 90 – Silver Part No:  STC50245

Features sill edge and rear corner protectors and two front bumper step plates.
Defender 90SW, silver STC50245. Defender 110SW – except HCPU – silver (not shown) STC50381. Defender 110SW – except HCPU - black (not shown) EBN500051. Defender 90SW, black (not shown) EBN500050.

Please note: Front bumper step plates are not compatible with PIAA Driving Lamp Kit (LR006815).

Expedition Roof Rack System – 90* Expedition Roof Rack System – 90* Part No:  VPLDR0063

90 Hard Top/Station Wagon Part No: VPLDR0063‡.
110 Hard Top/Station Wagon (not shown) Part No: VPLDR0064.
110/130 Double Cab (not shown) Part No: VPLDR0065‡.
Heavy duty rack system secured by clamps to the roof gutter.

†Maximum permissible load capacity minus the weight of the roof mounted accessory.
‡Not available in all European markets. Please see your Land Rover Dealer for further details.

Hinged Lamp Guards – front pair* Hinged Lamp Guards – front pair* Part No:  STC53161

These hinged lamp guards will help protect front and rear lenses from flying stones and low-speed impact, with an opening feature to enable easy lamp cleaning. Constructed from durable, black nylon-coated steel with plastic ‘P’ clips to help prevent corrosion.

Hinged Lamp Guards – front pair STC53161.
*Not compatible with Moulding Kit (LR008361).
†Not available in all European markets. Please see your Land Rover Dealer for further details.

9.5ti Electric Winch 9.5ti Electric Winch Part No:  VPLDP0113

Rated capacity of 9,500lb/4,310kg. 38m x 8mm diameter wire rope. This powerful electric winch is designed to fit easily to the front of your Defender, even if the air conditioning option is fitted. Offering maximum reliability for all general winching and self recovery requirements, the winch is available as a complete vehicle kit, ensuring specification and installation are straightforward.
Features include:
• Fully reversible power for two-way winching
• Remote control operation, with 3.7m/12 feet cable
• Fully automatic load actuated braking system
• Tough replacement bumper/winch mounting designed to cope with heavy duty usage
• Sealed-for-life, water resistant winch gear housing
• Kit includes winch, mounting brackets, remote control, electrics safety cut-out switch and fixings.

†Not recommended for use with Moulding Kit (Part No: LR008361).

Xenon Bulb Upgrade Kit Xenon Bulb Upgrade Kit Part No:  VPLDV0061

Enhanced light output. 2007 Model Year vehicles onwards.

Undershield Old Style Undershield Old Style Part No:  STC50437

Aluminium blade with steel sub-structure.

Sports

Sometimes even Defender needs extra help with the awkward loads. Sports bars give Defender the flexibility to deal with heavy kit, while the Aqua sports carrier makes easy work of kayaks, surfboards and windsurfers.

Accessories for this model of Defender
Aqua Sports Carrier* Aqua Sports Carrier* Part No:  LR006846

Carries one surfboard or sailboard and mast, or one canoe or kayak. Maximum payload 45kg†.

*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories.
†Maximum permissible load capacity minus the weight of the roof mounted accessory.
‡Not available in all European markets. Please see your Land Rover Dealer for further details.

Sports Bar System* Sports Bar System* Part No:  STC7582

A high leg design which extends the carrying potential for a variety of equipment. The sports bars can accommodate a range of attachments, including roof boxes and special carriers for various sports equipment. Vehicle height when fitted 2,088mm (90SW) and 2,141mm (110SW). Maximum payload 75kg†.

*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories.
†Maximum permissible load capacity minus the weight of the roof mounted accessory.

Front Mudflaps Front Mudflaps Part No:  RTC9479

Heavy duty moulded mudflaps reduce spray and help protect vehicle paintwork. Mudflaps, front pair for 90 and 110 models only.

Raised Air Intake Raised Air Intake Part No:  LR008383

Ideal for dusty conditions, this raised air intake secures to the vehicle’s ‘A’ post and also utilises the existing air intake vent fixings. Suitable for Td5, 2.4 and current 2.2 Diesel engines.

Please note: Not compatible with SVX Soft Top model.

Moulding Kit – Bright Silver Finish Moulding Kit – Bright Silver Finish Part No:  LR008361

Includes four bar grille and headlamp moulding surrounds.
Please Note: Not recommended for use with 9.5ti Electric Winch (VPLDP0113)

Utility

Defender is right at home in tough working environments, but these accessories provide extra protection in potentially hazardous conditions.

Accessories for this model of Defender
A-Frame Protection Bar* A-Frame Protection Bar* Part No:  VPLPP0060

Manufactured from durable polymer, suitable for models with or without air conditioning. *Compliant to EEC Directive 2005/66.

Chequer Plate Protection Kit, for Defender 90 – Silver Chequer Plate Protection Kit, for Defender 90 – Silver Part No:  STC50245

Features sill edge and rear corner protectors and two front bumper step plates.
Defender 90SW, silver STC50245. Defender 110SW – except HCPU – silver (not shown) STC50381. Defender 110SW – except HCPU - black (not shown) EBN500051. Defender 90SW, black (not shown) EBN500050.

Please note: Front bumper step plates are not compatible with PIAA Driving Lamp Kit (LR006815).

Hinged Lamp Guards – front pair* Hinged Lamp Guards – front pair* Part No:  STC53161

These hinged lamp guards will help protect front and rear lenses from flying stones and low-speed impact, with an opening feature to enable easy lamp cleaning. Constructed from durable, black nylon-coated steel with plastic ‘P’ clips to help prevent corrosion.

Hinged Lamp Guards – front pair STC53161.
*Not compatible with Moulding Kit (LR008361).
†Not available in all European markets. Please see your Land Rover Dealer for further details.

Front Mudflaps Front Mudflaps Part No:  RTC9479

Heavy duty moulded mudflaps reduce spray and help protect vehicle paintwork. Mudflaps, front pair for 90 and 110 models only.

Wing Top Protectors – Silver Wing Top Protectors – Silver Part No:  LR005230

Manufactured in an aluminium chequer plate design, these enable access to roof racks and a potential viewing height advantage. Wing Top Protectors – Silver LR005230. Wing Top Protectors - Black (not shown) LR005242 (2007 Model Year vehicles onwards).

Sports Bar System* Sports Bar System* Part No:  STC7582

A high leg design which extends the carrying potential for a variety of equipment. The sports bars can accommodate a range of attachments, including roof boxes and special carriers for various sports equipment. Vehicle height when fitted 2,088mm (90SW) and 2,141mm (110SW). Maximum payload 75kg†.

*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories.
†Maximum permissible load capacity minus the weight of the roof mounted accessory.

9.5ti Electric Winch 9.5ti Electric Winch Part No:  VPLDP0113

Rated capacity of 9,500lb/4,310kg. 38m x 8mm diameter wire rope. This powerful electric winch is designed to fit easily to the front of your Defender, even if the air conditioning option is fitted. Offering maximum reliability for all general winching and self recovery requirements, the winch is available as a complete vehicle kit, ensuring specification and installation are straightforward.
Features include:
• Fully reversible power for two-way winching
• Remote control operation, with 3.7m/12 feet cable
• Fully automatic load actuated braking system
• Tough replacement bumper/winch mounting designed to cope with heavy duty usage
• Sealed-for-life, water resistant winch gear housing
• Kit includes winch, mounting brackets, remote control, electrics safety cut-out switch and fixings.

†Not recommended for use with Moulding Kit (Part No: LR008361).

Jaguar Land Rover Limited: Registered Office: Abbey Road, Whitley, Coventry CV3 4LF Registered in England No: 1672070